Lithium Batteries (Lipo, Liion, Life); General Information - VOLTCRAFT B6 Duo Notice D'emploi

11. LITHIUM BATTERIES (LIPO, LIION, LIFE)

a) General Information
This charge program is only suited for batteries with Lithium technology, "LiPo",
"LiIon" and "LiFe". The respective battery type, which you want to connect to
the charger, must be set prior to starting a charge/discharge procedure (in the
"User" settings, see chapter 16).
If the rechargeable battery has a balancer connection, the balancer connecting
must be connected to the charger as well as the rechargeable battery's cable
for charging/discharging.
Use the correct balancer connector depending on the number of cells. Ensure
that you are using the right balancer connection for the respective charging
channel!
There are different types of balancer plug. For this reason, do not use force if
the plug does not fit! Suitable adapters are available to purchase for the
balancer plug.
When using a balancer (integrated in the charger, all cells of a multi-cell
battery pack have the same voltage after the charge process, which prevents
the overcharging of individual cells (danger of fire and explosion) or a deep
discharge of one of the cells (damage to the rechargeable battery).
The charge current to be set depends on the battery capacity and build (see
chapter 7). Observe the instructions of the battery manufacturer.
In the main menu, select the battery program "LiPo BATT" with the button "TYPE/STOP"
(see following note) and confirm your selection with the "ENTER/START" button.
Depending on the battery type selected in the submenu "USER SET" (chapter 16),
the display shows "LiPo BATT" (basic setting at delivery), "LiIon BATT" or "LiFe
BATT".
Check whether the battery type (e.g. "LiPo") indicated on the display coincides with
the battery you want to charge/discharge.
If you want to charge LiIon or LiFe batteries, you will have to select the correct
battery type in menu "USER SET" (chapter 16)!
74