Information On The Charger - VOLTCRAFT B6 Duo Notice D'emploi

20. INFORMATION ON THE CHARGER

Various information is indicated on the display during a charge/discharge process by
repeatedly pressing the button "-"+.
End Voltage End Voltage End Voltage
End Voltage End Voltage
12.6V(3S) 12.6V(3S)
12.6V(3S) 12.6V(3S) 12.6V(3S)
Capacity Cut-OFF Capacity Cut-OFF Capacity Cut-OFF
Capacity Cut-OFF Capacity Cut-OFF
ON ON
ON ON ON
Safety Timer Safety Timer
Safety Timer Safety Timer Safety Timer
ON ON ON
ON ON
Temp Cut-OFF Temp Cut-OFF
Temp Cut-OFF Temp Cut-OFF Temp Cut-OFF
ON ON ON
ON ON
Ext.Temp Ext.Temp Ext.Temp
Ext.Temp Ext.Temp
IN Power Voltage IN Power Voltage IN Power Voltage
IN Power Voltage IN Power Voltage
By repeatedly pressing the "+" button, you can switch to the display of the voltage in the
individual cells, e.g. with lithium batteries (this only makes sense if the balancer connec-
tions are used with lithium batteries).
Example of a 3-cell LiPo battery:
C1:4.12 C2:4.15 C1:4.12 C2:4.15
C1:4.12 C2:4.15 C1:4.12 C2:4.15 C1:4.12 C2:4.15
C3:4.13 C4:0.00 C3:4.13 C4:0.00 C3:4.13 C4:0.00
C3:4.13 C4:0.00 C3:4.13 C4:0.00
5000mAh 5000mAh
5000mAh 5000mAh 5000mAh
200min 200min 200min
200min 200min
80C 80C 80C
80C 80C
26C 26C 26C
26C 26C
12.56V 12.56V
12.56V 12.56V 12.56V
Voltage of the battery at the end of charging/
discharging
Battery capacity for safety cut-off
Time for safety timer
Temperature cut-off on/off; selected cut-off
temperature (only with external temperature
sensor)
Temperature measured by the external tempera-
ture sensor
Input voltage
101