VOLTCRAFT B6 Duo Notice D'emploi page 95

With the buttons "+" or "-", you can select between "ON" and "OFF".
Briefly press the button "ENTER/START" in order to save. "ON" (or "OFF") then starts to
blink in the bottom display line.
With the buttons "+" or "-", you can select between "ON" and "OFF".
Save the setting by pressing the "ENTER/START" button.
• With the "+" button, you access the next setting (or with the button "-" the previous setting
or return to the main menu with the button "TYPE/STOP".)
Input Power Low Input Power Low
Input Power Low Input Power Low Input Power Low
Cut-Off Cut-Off Cut-Off
Cut-Off Cut-Off
This function monitors the voltage at the charger input (e.g. for a 12 V battery). If the
voltage drops below the configured value, the charging process is stopped.
Briefly press the button "ENTER/START". The voltage value then begins to flash.
With the buttons "+" or "-", you can set the voltage value (10 to 11 V).
Save the setting with the button "ENTER/START"; the voltage stops flashing.
• With the "+" button, you access the next setting (or with the button "-" the previous setting
or return to the main menu with the button "TYPE/STOP".)
Back-light Back-light
Back-light Back-light Back-light
Here you can set the brightness of the display.
Briefly press the button "ENTER/START". The brightness value then begins to flash.
With the buttons "+" or "-", you can set the brightness.
Save the setting with the button "ENTER/START"; the brightness value stops flashing.
• With the "+" button, you access the next setting (or with the button "-" the previous setting
or return to the main menu with the button "TYPE/STOP".)
10.0V 10.0V 10.0V
10.0V 10.0V
100% 100%
100%
100% 100%
95