Information On The Charger - VOLTCRAFT V-CHARGE 100 DUO Notice D'emploi

20. Information on the Charger

Various information is indicated on the display during a charge/discharge process by repeatedly
pressing the button "DEC". If you do not push any button for a few seconds, the charger will
return to the normal display.
The information that can be displayed depends on the connected rechargeable bat-
tery type.
Voltage of the battery at the end of charging/discharging
End Voltage
12.6V(3S)
Input voltage
IN Power Voltage
Display of the temperature at the external temperature sensor
Ext.Temp
Int.Temp
If no external temperature sensor is connected (not enclosed, can be ordered sepa-
rately), "Ext.Temp" will display "0C".
Duration for safety timer
Safety timer
ON
Battery capacity for safety cut-off
Capacity Cut-off
ON
14.93V
0C
27C
200min
5000mAh
115