Visualisation - socomec ATyS Série Notice D'utilisation

7.5. Visualisation

7.5.1. presentation
• This mode allows parameters to be displayed independently from the selector
• No code required to access parameters visua lisation
• Without any action during 5 minutes on the keypad, the LCD displays voltage available on active network. In case of changeover
switch on 0 position, priority network voltage is displayed.
7.5.1-1
navigation in visualisation mode
• Press "up" and "bottom" push buttons to access required parameter
• Press "left" and "right" push buttons to navigate in the different menus
7. opEratIoN atyS 6s and 6e
/ AUT switch position
ATyS 3e, 6e, 6s - Ref.: 531 848 G GB 121