socomec ATyS Série Notice D'utilisation page 120

7.4. Operation (cont.)
7.4.5. Control , 0,
1
It can be activated from:
- operation mode. It is possible to select the position of the changeover switch (
- dry contacts. It is the possible to select the position of the changeover switch (
- communication optional module,
- interface ATyS D20.
Description
Electrical operation of the changeover switch to reach position: PS1, PSO, PS2 (
1
(source connected to switch I or II).
The remote control has priority in automatic mode. The product keeps in control mode after transfer
sequence.
Remote activation
This mode is activated by closing terminals 313 and 317. Changeover switch position depends on orders present between terminal
317 and terminals 314-315-316.
Keypad activation
7.4.5-1
Select required position pS1, pSo or pS2
Press "mode" push button Yes is displayed on the screen for active position
7.4.5-2
Select a new position (from 1 to 0)
120 ATyS 3e, 6e, 6s - Ref.: 531 848 G GB
(accessible in AUT mode)
2
7. opEratIoN atyS 6s and 6e
6s 6e
1 2
1 2
, O,
1 2
, O, ) from specific inputs (terminals 313 to 317),
1
, O or
1 2
1 2
1 2
) from keypad,
2
) according to switches configuration