Installing The Keypad; Electrical Connections For Various Synchronisation Cards - Bodet Style 5S Hôpital Notice D'installation

2.2 Installing the keypad

To install and use the keypad (including in timer mode), refer to the instructions supplied with the
keypad.

2.3 Electrical connections for various synchronisation cards

Below are the wiring diagrams for the electronic boards for the various synchronisations.
IND (independent) synchronisation card
Neutral (blue)
Phase (brown)
IMP (impulse) synchronisation card
Neutral (blue)
Phase (brown)
AFNOR synchronisation card
Neutral (blue)
Phase (brown)
8
Connector for control keypad
Refer to the keypad instructions
(supplied with the keypad)
Connector for control keypad
Refer to the keypad instructions
(supplied with the keypad)
Connector for control keypad
Refer to the keypad instructions
(supplied with the keypad)
EN
Use the
appropriate
polarity for
the network
(otherwise
(black)
there will be
(red)
a delay of
30-60 secs).
Polarity is
(black)
irrelevant to
(red)
the network