Bodet Style 5S Hôpital Notice D'installation page 7

3) Connections
- Connect the electronic board (see next page) and the keypad (optional) to the terminal strip on
the back of the clock.
Example of a Style 5S Hospital
Impulse synchronisation electronic board
- Set the brightness by pressing the "S" and "+" keys on the back of the clock (see above).
- Brightness may be adjusted when the Style clock is in normal use mode, i.e. in neither the
configuration menu, nor in the set time menu. The default brightness is level 3.
+
Hold down for 3 seconds
+
S
End of menu
+
+
T-
Brown
T+ White
0V
Green
15V
Yellow
Connecting the keypad
Configuration keys: S and +
Connector for wiring
synchronisation via impulse
Select light intensity:
LUM 1: low intensity
LUM 4: high intensity
EN
7