Loading Organ Combinations And/Or Settings (File Load Function) - Viscount Cantorum Trio Mode D'emploi

User Manual
N.B.
- Once the USB pen is inserted please wait some seconds before displaying the FILE menu.
- The system displays the error message "USB PEN NOT PRESENT" when accessing the FILE
functions without a USB drive connected to the instrument, or when the pen drive has not been
recognized. Should this happen, check that the pen drive is not damaged and has the correct format.
- To copy files with a computer to a USB drive that has never been used with the organ, it is necessary to
create the folders (described above) manually. Files must be placed in the dedicated folder; follow the
instructions on the folders and their function.
-
Always use USB pens formatted with FAT or FAT32 file system (no NTFS).
- The folders "alls", "combinations", "settings", "styles_all" and "styles_single" can contain up to a
maximum of 64 files. The "songs" folder can contain up to 256.
-
File names cannot be longer than 30 characters (including the file extension).
7.2 LOADING ORGAN COMBINATIONS AND/OR SETTINGS
(FILE LOAD function)
The organ can save the current configurations. The FILE LOAD function allows to recall into the work
memory these configurations and combinations already saved to the USB pen and therefore use them.
To load a file, select the LOAD field under the FILE menu:
select what you wish to load:
o ALL: the complete organ configuration.
o COMBINATIONS: all general combinations, Plenum (only in the Cantorum Trio), Tutti, Crescendo
steps.
o STYLE – ALL: the 4 organ styles.
o STYLE – CURR.: a single Style.
o SETTINGS: the general organ settings, from the SETTINGS menu.
Once the loading option has been selected, the display shows the corresponding files on the USB drive:
if there are no files for the selected file type, the display shows the message "NO FILES".
EN - 30