Organ General Settings; Setting The Tremulants - Viscount Prestige 50 Guide Rapide

Viscount Prestige 50
Pressing the [SET-UP] button on the central panel gives access to the organ's general settings.
The page displayed is as follows:
[TREMULANT] [REVERB] [KEYBOARDS SETTING]
[INTERNAL EQUALIZER]
containing the following selection fields:
o TREMULANT: for setting the Tremulants on each manual.
o REVERB: for selecting the type of reverb required.
o KEYBOARDS SETTING: for adjusting the general parameters for the manuals and the pedal
board.
o INTERNAL EQUALIZER: for setting the organ's internal equalizer.
NOTE
The INTERNAL EQUALIZER function is described in the "Advanced Manual".
To select the function required, place the cursor on the relative field using the [CURSOR] buttons
and press [ENTER].
Otherwise, press [EXIT] or [SET-UP] to exit the current menu and return to the main menu page.
Instead by pressing a button in a different menu it will be possible to access directly the list of
functions required.

4.1 SETTING THE TREMULANTS

The TREMULANT function can be used to set the modulation speed and depth of the tremulants
for each manual. When the TREMULANT field is selected in the SET-UP menu, the display will
show the page:
TREMULANT:
Depth/Speed
which shows the two manuals and, on the bottom line, the Depth (modulation depth) and Speed
(modulation speed).
- Quick Guide

4. ORGAN GENERAL SETTINGS

Manual I Manual II
16/16
40
16/16