Selecting The Orchestral Voices (Orchestra Function) - Viscount Cantorum Trio Mode D'emploi

User Manual

6.3 SELECTING THE ORCHESTRAL VOICES (ORCHESTRA function)

As described in chap. 2, in the set of voices of the instrument are also present a series of orchestral timbres.
To select an orchestra voice, access the STYLES menu and then select the ORCHESTRA field. The display
shows:
For each division, in the VOICE column you can select the orchestral voice while in the SUS. column you
can enable or disable the Sustain pedal function.
For easier detection, the thumb piston being programmed is switched on based on the position of the cursor
on the display.
To quit the function press [EXIT]. The changes made will be automatically saved in the current organ style.
NB
Any general combination and Tutti can recall orchestra voices; this means that the stops can be used to
activate different voices, according to the current combination/Tutti. To save orchestra voices to
combinations or Tutti, the corresponding option must be activated through the COMBINATIONS function
(see par. 5.6).
Cantorum Trio
EN - 28
Cantorum Duo