User Manual
procedure for the still unregistered position and any other connected pedal.
Press [EXIT] to leave the screen and save the current settings.
5.8 SAVING THE PROGRAM CHANGE MIDI MESSAGES IN THE
COMBINATIONS (COMBINATION PRG function)
Program Change MIDI messages can recall, in a connected unit, a particular sound or program (patch).
Thanks to this function you may select a desired voice from external module (such as an expander)
connected to the [MIDI OUT] port.
You can also transmit Bank Select messages MSB (CC n. 0) and LSB (CC n.20) to select stop banks from an
external source.
Select the COMBIN. PRG field in the MAIN MENU, then press [ENTER]:
Cantorum Trio
Cantorum Duo
The column on the left lists the organ section, and the associated Program Change and MSB and LSB Bank
Select messages are shown in the PRG, BANK MSB and BANK LSB columns.
Please note that the MIDI messages of this screen are immediately sent to the corresponding section, and also
saved in the combinations and Tutti. To do so, select the Program Change and Bank Select and fix the
desired memory. This process might prove useful when, using an external expander, you wish to combine a
voice from this unit with other stops.
When a MIDI message is not necessary, cancel it by selecting the OFF value.
To leave the screen and go back to the MAIN MENU press [EXIT].
5.9 SECURITY LOCK AGAINST UNWANTED CHANGES
(SECURITY function)
In order to prevent any modification to the organ settings, the SECURITY function should be used. When
active, combinations, Tutti, Crescendo steps and Local Off stops cannot be modified. Only the tuning
parameters in the Main Page and Organ Style selection will be available.
To recall this function, select the SECURITY field in the SETTINGS menu.
in this first screen you can set what you want to block:
o SETTINGS: general instrument settings (SETTINGS menu).
o STYLES: organ Styles parameters (STYLES menu).
o COMBINAT. (Combinations): combinations, Tutti and Crescendo.
EN - 20