Viscount Cantorum Trio Mode D'emploi page 97

Selecting PLAY or PLAY FROM LAST OVD will activate the sequencer play mode. Press [EXIT] to
return to the previous screen.
Press [EXIT] to quit the screen. The display will show:
Warning you that the overdubbing will be lost. Press [ENTER] to continue – and therefore discard the
recording – or [EXIT] to return to the previous screen.
N.B.
- The system displays the error message "USB PEN NOT PRESENT" when trying to save a MIDI
sequence without a USB drive connected to the instrument, or when the pen drive has not been
recognized. Should this happen, check that the pen drive is not damaged and has the correct format.
- The error message "FILE LOAD FAILED" means that the file is damaged or bigger than 128 KB
(maximum files size that you can overdub).
- In the case of "FILE SAVE FAILED" error, retry the operation. If the error occurs again, check that
there is enough space in the USB stick. If the error still occurs, the USB stick could be damaged so try
using a different stick or format it with a computer.
ACCEPT
1
05:20
ORIGINAL
03:10
OVERDUB
05:20
NEW
2
05:20
ORIGINAL
06:00
OVERDUB
06:00
NEW
EN - 39
TRIM AND ACCEPT
1
05:20
ORIGINAL
03:10
OVERDUB
03:10
NEW
2
05:20
ORIGINAL
06:00
OVERDUB
06:00
NEW
User Manual