Viscount Cantorum Trio Mode D'emploi page 72

User Manual
To access the calibration page, select the EQUALIZERS field under the SETTINGS menu. The following
video page will appear:
the page contains the following fields:
o INTERNAL: graphic equalizer for the internal amplifier (and therefore for the internal speakers).
o OUT 1: graphic equalizer for the [OUT 1] output pair, on the rear panel.
o OUT 2: graphic equalizer for the [OUT 2] output pair, on the rear panel.
This is the graphic equalizers calibration page:
In the lower part of the screen there are the seven central band frequencies. To move the cursor from one
band to the other, use the buttons [FIELD ] e [FIELD ].
Each band can be modified, using the buttons [VALUE +] and [VALUE -] from +9 dB (maximum signal
gain) to -9 dB (maximum signal dampening). The level of gain or attenuation is graphically represented and
can be compared to the grading scale on the left side of the screen.
The following graph shows how the graphic equalizers works.
Gain
+9 dB
+8 dB
+7 dB
+6 dB
+5 dB
+4 dB
+3 dB
+2 dB
+1 dB
0 dB
-1 dB
-2 dB
-3 dB
-4 dB
-5 dB
-6 dB
-7 dB
-8 dB
-9 dB
100 Hz
20 Hz
In all the equalizers, press [EXIT] to exit the video page and save the new settings.
N.B.
The equalizers also affect the signal from the [INPUT] port located on the rear panel.
220 Hz 460 Hz
EN - 14
1 KHz 2,2 KHz 4,6 KHz
F
10 KHz
20 KHz