Viscount Cantorum Trio Mode D'emploi page 63

4. [MAN. III] stops (Cantorum Trio only): here are collected the stops for the Manual III section.
5. Control and programming section.
The buttons and the display in this sections allow the user to program and set up the instrument and the
sequencer.
-
[VOLUMES]: access the video page for all the volumes of the instruments.
-
[SEQUENC.]: access the video pages for the use of the internal sequencer of the instrument.
-
[FIELD ] and [FIELD ]: buttons used to move the cursor, identified by the field in reverse.
[FIELD ] moves it in the field above or the previous field, [FIELD ] in the field below or the
next field.
-
[VALUE +] and [VALUE -]: buttons which regulate the values of the parameters, whether they are
numerical or alphanumerical. [VALUE +] increases, [VALUE -] decreases.
-
[EXIT] and [ENTER]: access and quit the display screens and menus, or confirm or cancel
prompts made by the system. [ENTER] accesses menus/screens and confirms, [EXIT] quits
menus/screens and cancels.
6. [VOLUME] slider: controls the overall volume of the organ.
7. [REVERB] slider: controls the amount of reverberation effect.
Cantorum Trio
8
13 14
Cantorum Duo
8
13 12
9 10
15
11
EN - 5
11
9 15
9
User Manual
12
16 17 15
10
15 17 15