Chorale 2 - Chorale P31
Viscount
7.7 [PREV] AND [NEXT] PISTONS SETTINGS
The Chorale setup procedure allows you to set the function of the pistons used for sequential recall of the
general combinations [PREV] and [NEXT].
To set this function, select the PREV/NEXT PISTONS field in the SET UP menu; the display shows the
screen:
If GENERAL MEMORY is selected the pistons operate like ordinary sequencers, recalling the individual
general combinations in ascending or descending order.
If MEMORY BANK is set, sequential selection no longer occurs on the combinations but on the memory
banks (MEMORY BANK option in the main screen). [NEXT] therefore selects the memory banks in
ascending order, [PREV] in descending order.
Once you have set the two functions as you require, press [EXIT] to return to display of the SET UP
menu.
7.8 COMBNATION SAVING SETTINGS
The FUNCTION STORED INTO PISTONS function in the SET UP menu allows you to choose what
you wish to save in the general and specific combinations and the Tutti in order to further customise the
organ's performance features.
After the FUNCTION STORED field is selected in the SET UP menu, the display will show:
This screen allows you to enable and disable saving of the Tremulant Depth and Speed values, so that
you can obtain Tremulants of different modulation depth and speed by recalling the various combinations.
Use the [VALUE +] and [VALUE -] buttons to select YES to enable saving or NO to disable it.
Now press the [FIELD
in which you can decide whether or not to save the status of the Enclosed and the Automatic Pedal. Here
again, set YES to enable saving or NO to disable it.
Finally, press [EXIT] to save the changes made and return to display of the SET UP menu.
_ïóäú/ì
PREV/NEXT PISTONS
ACTION: GENERAL MEM
FUNCTION STORED
____INTO ïéòôîìò____
TREMULANT DEPTH
AND SPEED: NO
] button to display the second saving setting screen:
FUNCTION STORED
____INTO ïéòôîìò____
ENCLOSED AND
AUT. PED.:
äûô PISTONS__
Ö
¿
NO
62
Owner's Manual