Organ General Settings - Viscount Prestige 100 Guide Rapide

Viscount Prestige 100
Pressing the [SET-UP] button on the central panel gives access to the organ's general settings.
The page displayed is as follows:
[TREMULANT] [REVERB] [KEYBOARDS SETTING]
[INT.EQUALIZER] [ANTIPH.OUT]
On the version of the organ equipped with AFC reverb the SET-UP menu consists of two pages:
[TREMULANT] [REVERB] [KEYBOARDS SETTING]
[EXTERNAL ANTIPHONAL OUTPUTS SETTING]
containing the following selection fields:
o TREMULANT: for setting the Tremulants on each manual.
o REVERB: for selecting the type of reverb required. Balance between the internal reverb and
the AFC reverb (only on the version with AFC reverb).
o KEYBOARDS SETTING: for adjusting the general parameters for the manuals and the pedal
board.
o INT. EQUALIZER / INTERNAL EQUALIZER: for setting the organ's internal equalizer.
o ANTIPH. OUT / EXTERNAL ANTIPHONAL OUTPUTS SETTING: for setting the rear
outputs [ANTIPHONAL OUT].
o AFC EFFECT CALIBRATION: automatic calibration of the AFC reverb.
NOTE
INTERNAL EQUALIZER, ANTIPHONAL OUT and AFC EFFECT CALIBRATION functions
are described in the "Advanced Manual".
To select the function required, place the cursor on the relative field using the [CURSOR] buttons
and press [ENTER]. Otherwise, press [EXIT] or [SET-UP] to exit the current menu and return to
the main menu page. Instead by pressing a button in a different menu it will be possible to access
directly the list of functions required.
- Quick Guide

4. ORGAN GENERAL SETTINGS

[INTERNAL EQUALIZER]
[AFC EFFECT CALIBRATION]
44