Switching On And Main Video Page - Viscount Cantorum Trio Mode D'emploi

3. SWITCHING ON AND MAIN VIDEO PAGE

After switching on the instrument, the display shows the introduction page,
then, the current version (Release) of the operating system,
the main video page appears in a few seconds,
On the top of this video page are the following parameters:
o TRANSPOSER: set the transposer.
o TUNING: fine tuning of the pitch, indicated as the frequency of A3 (an 8' pipe).
o TEMPER. (Temperament): selector for setting historical temperaments of various periods (for a
description of temperaments, see par. 10.2 and 10.3).
Here, as in all video pages, use the [FIELD ] and [FIELD ] buttons to move the cursor. When selected
by the cursor, fields invert colour.
To set the value of a parameter, select it with the cursor, then press use [VALUE +] and [VALUE -]. Some
parameters have a central range value (e.g. -6 / 0 / +6); to modify the central value, press simultaneously the
VALUE buttons. This will select the central value.
The display field MAIN MENU allows to access the main menu with all the organ configurations. To enter
the menu, place the cursor on this field and press [ENTER].
To return to the main video page from the MAIN MENU, press [EXIT].
In the lowest part of the video page there are 3 boxes that indicate:
o BANK: the current memory bank;
o CRESC.: the currently selected Crescendo step;
Cantorum Trio
Cantorum Trio
EN - 9
Cantorum Duo
Cantorum Duo
User Manual