Viscount Cantorum Trio Mode D'emploi page 92

User Manual
Now select the MIDI file you wish to play back:
The new screen provides information about all the controls necessary for use of the sequencer:
-
[ENTER]: starts playback of the songs.
-
[EXIT]: quits the sequencer function.
-
[FIELD ]: fast forward.
-
[FIELD ]: rewind.
-
[VALUE -]: slow down play speed. It can be seen on top left as percentage (100% in the picture above).
-
[VALUE +]: increase play speed. It can be seen on top left as percentage (100% in the picture above).
Once the playback of a song has been started, the display changes to:
furthermore, the functions of the buttons [ENTER] and [EXIT] have changed:
-
[ENTER]: pause / play the track.
-
[EXIT]: stop the reproduction.
[FIELD ], [FIELD ], [VALUE -], [VALUE +] keep the functions already described.
N.B.
- Once the USB pen is inserted please wait some seconds before selecting the PLAY mode.
-
The system displays the error message "USB PEN NOT PRESENT" when selecting the PLAY mode
without a USB drive connected to the instrument, or when the pen drive has not been recognized.
Should this happen, check that the pen drive is not damaged and has the correct format.
- The error message "FILE LOAD FAILED" means that the file is damaged or bigger than 250 KB
(maximum files size that you can play with this sequencer).
EN - 34