Viscount Cantorum Trio Mode D'emploi page 66

User Manual
N.B.
- When switching on, the instrument automatically detects the polarity of the switch pedal connected to
the [SUSTAIN] connector. Do not hold down the pedal when turning the power on, to avoid reversing
the operation of the pedal.
-
The [CRESC.] pedal can control also the volume of Pedal and Manual II or Manual I (Cantorum Trio)
or Pedal and Manual I (Cantorum Duo). For further information about this function read par. 5.7.
20. [INPUT] connector: stereophonic line input for external audio signals. The external audio signal is
added to the sound produced by the instrument.
21. [USB] connector: USB drive connector (drive not included with the instrument), where the organ
settings and songs recorded with the internals sequencer can be saved.
22. [MIDI] connectors: connectors for connecting MIDI devices.
-
[IN]: input connector for receiving data from an external MIDI unit to the instrument. Connect to
the MIDI output of the transmitting device (e. g. a sequencer).
-
[OUT]: this connector transmits the MIDI data generated by the instrument. Connect to the MIDI
input of the receiving device (e. g. an expander).
N.B.
-
For further information about the MIDI interface, read par. 5.4, 10.5 and 10.6.
- For further information about the USB devices, read par. 7.1.
23. [PHONES] connector: jack socket to which a headphone set can be connected. With headphones
connected, the organ's internal amplification is cut off.
24. [MAINS AC-IN] socket: connector for the power cable supplied with the instrument.
25. [POWER] switch: switches the instrument on and off.
EN - 8