Prev] And [Next] Pistons Settings; Combination Saving Settings - Viscount Chorale 3 Mode D'emploi

Owner's Manual Viscount Chorale 3
6.7 [PREV.] AND [NEXT] PISTONS SETTING
The Chorale 3 setup procedure allows you to set the function of the pistons used for sequential recall of
the general combinations. To set these function, select the PISTONS SETTINGS field in the SET UP
menu; the display shows the screen:
If GENERAL MEMORY is selected the pistons operate like ordinary sequencers, recalling the individual
general combinations in ascending or descending order. If MEMORY BANK is set, sequential selection
no longer occurs on the combinations but on the memory banks (MEMORY BANK option in the main
screen). [NEXT] therefore selects the memory banks in ascending order, [PREV.] in descending order.
Once you have set the two functions as you require, press [EXIT] to return to display of the SET UP
menu.

6.8 COMBINATION SAVING SETTINGS

The FUNCTION STORED INTO PISTONS function in the SET UP menu allows you to choose what
you wish to save in the general combinations and the Tutti in order to further customise the organ's
performance features. After the FUNCTION STORED field is selected in the SETUP menu, the display
will show:
This screen allows you to enable and disable saving of the Tremulant Depth and Speed values, so that
you can obtain Tremulants of different modulation depth and speed by recalling the various combinations.
Use the [VALUE +] and [VALUE -] buttons to select YES to enable saving or NO to disable it.
Now press the [FIELD ] button to display the second saving setting screen:
in which you can decide whether or not to save the status of the Enclosed and the Automatic Pedal. Here
again, set YES to enable saving or NO to disable it.
65