Fitting And Lowering The Floor-Tool - Numatic TTB 4045/100 Mode D'emploi

Fitting and lowering the Floor Tool
The floor-tool has been designed for quick fitting, allowing easy squeegee blade replacement and a safety knock-off
feature if the floor-tool gets snagged, whilst in transit.
Note:
It is easier to fit the floor-tool if the weight of the machine is resting on the brush. Ensure the brush is fitted first.
Fit the floor-tool and retain using
the detent pin (Fig.18).
The lifting strap is held by a
detent pin (Fig.19).
Fig.18
We are now ready to set the
controls to suit the cleaning
conditions.
Raise the floor-tool for transit or
lower for cleaning operation
using the lifting handle fitted to
the back of the machine
(Fig.20).
Before any settings can be applied, ensure the brush deck is lowered.
26
Fig.19
Fig.20