Numatic TTB 4045/100 Mode D'emploi page 22

6
7
Fig.12
8
Off-Aisle Cleaning Kit (Optional Extra Accessory)
Fit the Brush / Pad (Fig.9).
Push in the deck
locking pin (Fig.10)
and rotate the
brush deck into
the operating
position (Fig.11).
Fig.9
Turn on the clean-water tap (Fig.12).
To start: hold either trigger and press the yellow start button once
(Fig.13).
Brush, vacuum and water settings can be controlled by the control panel
(See Page 34).
Fig.13
Fill the clean water to a Max of 40 litres (see page 28)
For operation and cleaning controls (see page 34)
TTB = 38mm Ø 606182
ETB = 32mm Ø 606168
Fig.10
22
Off
Fig.11
On