Clear The Settings - SOMFY Slidymoove 300 Manuel D'installation Et D'utilisation

Repairs
6

6.3 Clear the settings

When should I delete the settings?
• A er auto-programming, if you change the position stop, if you change the motor wiring or if you
add a safety edge to the gate.
• If the gate opens at random due to normal wear of the gate.
1
>2s
• Press the
button on
the control
electronics for
2 seconds. The
indicator light
comes on.
To clear the settings*
6
32
EN - SLIDYMOOVE 300 installation and operating guide - SOMFY
2
• Place the
memorised
remote control
on the target.
• Keep button 2 of
the remote control
depressed until the
"RESET" indicator
light comes on.
7
3 4
• Keep button • Press button 1
1 of the on the remote
remote control control twice.
depressed until
the indicator
light flashes.
To clear the settings* and the
memorised remote controls/control
points
6
The indicator light
16 to run a auto-programming procedure).
*Gate travel, deactivation of the settings, ...
5
x2
The "RESET"
indicator light
flashes.
• Keep button 2 of
the remote control
depressed until the all
the indicator lights
come on.
flashes twice (see page