Tools Required For Installation (Not Provided); Screws Etc. Required For Installation Of The Rack And Pinion (Not Provided) - SOMFY Slidymoove 300 Manuel D'installation Et D'utilisation

Tools required for installation (not provided)

17
8
3,5
T25
PZ2
10

Screws etc. required for installation of the rack and pinion (not provided)

This information is provided for information purposes.
Screws etc.
required
Self-drilling hex-head
screw for metal of type
ST 6.3 x 30 mm
+ washer
PVC is tool fragile to fasten the rack and pinion directly.
PVC gates generally have an aluminium or metallic brace or a steel core
(see the line above).
If a PVC gate does not have a brace: fasten a metallic brace to the gate where the rack and pinion will be
fastened.
Wood screws, diameter
6 x 40 mm minimum +
washer
8
EN - SLIDYMOOVE 300 installation and operating guide - SOMFY
Tools required
Socket wrench no.10
Socket wrench no.10
12
Drilling diameter
5 mm with a drill for steel
Make a starter hole with a wood drill, diameter
2.5 mm or wood auger.