Setting Slow Speed (Continued); Returning To Standard Speed - SOMFY Slidymoove 300 Manuel D'installation Et D'utilisation

Setting slow speed (continued)

6
• Keep button 2 depressed until the indicator light P1 flashes slowly.
7
x2
• Press button 1 on the remote control twice. Indicator light P1 flashes slowly.
Slow speed is selected.

Returning to standard speed

1
>2s
• Position the remote control on the control
• Press the button
on the control
electronics for 2
seconds.
The indicator light
comes on.
4
x1
• Press button 1 on • Press button 2 on the remote control
the remote control
once.
Indicator light P1
flashes.
2
electronics target.
5
x1
once.
Indicator light P1 goes out for 5
seconds then flashes.
EN - SLIDYMOOVE 300 installation and operating guide - SOMFY
Advanced parameter settings
3
• Keep button 1 of the remote
control depressed until the
indicator light
6
• Press button 1 on the remote
control twice. Indicator light
P1 is off
Standard speed is selected.
4
flashes.
x2
27