Gate Speed; Field Of Application; Setting Slow Speed - SOMFY Slidymoove 300 Manuel D'installation Et D'utilisation

Advanced parameter settings
4

4.3 Gate speed

DANGER Any change to the gate speed setting must be performed by a professional motor and home
automation installer. Any changes which do not comply with these instructions represent a danger to
the safety of both people and property.

Field of application

Set the gate speed in accordance with the table below:
Gate weight
0 to <100 kg
100 to <200 kg
200 to <300 kg
WARNING If the speed setting is changed, the installer must check that the obstacle detection system
complies with appendix A of standard EN 12 453. Failure to follow these instructions could result in
serious injury, e.g. crushing by the gate.

Setting slow speed

1
>2s
• Press the
button on
the control
electronics for 2
seconds.
The indicator
light comes
on.
26
EN - SLIDYMOOVE 300 installation and operating guide - SOMFY
Standard speed
+ safety edge*
*Installation of a passive safety edge (ref. 9019612) mandatory on the gate.
2 3
• Position the • Keep button
remote control 1 of the
on the control remote control
electronics depressed until
target. the indicator
light
By default, the gate operates at standard speed
Slow speed
4
x1
• Press button 1
on the remote
control once.
flashes.
5
Indicator light P1
flashes.