Adding A Remote Control; Or 4-Button Remote Control; 3-Button Remote Control; Deleting A Remote Control - SOMFY Slidymoove 300 Manuel D'installation Et D'utilisation

Programming the remote controls
5

5.2 Adding a remote control

2 or 4-button remote control

1
• Press the
the control electronics
for 2 seconds.
The indicator light
comes on.

3-button remote control

1
• Press the
the control electronics
for 2 seconds.
The indicator light
comes on.

5.3 Deleting a remote control

See "Clearing the settings" page 32.
30
EN - SLIDYMOOVE 300 installation and operating guide - SOMFY
2
>2s
• Position the new
button on
remote control to be
programmed on the
control electronics
target.
2
>2s
• Position the remote
button on
control on the control
electronics target.
3
• Briefly press the button on the remote
control to be programmed. The RADIO
indicator light will come on then go out
when you release the button on the remote
control.
Complete opening is programmed on
this button.
3
• Briefly press a button on the remote control
to be programmed.
The RADIO indicator light will come on then
go out when you release the button on the
remote control.
The remote control has been memorised.
<0,5s
<0,5s