Replacing The Electronic Unit 1; Installing The New Electronic Unit - SOMFY SLIDYMOOVE Manuel

1.1 Installing the new electronic unit

For your safety, these operations must be carried out with the power supply switched off.
1 2
• Switch the • Unscrew and remove the
installation motor cover.
off.
4
• Install and screw the new electronic unit into
place.

REPLACING THE ELECTRONIC UNIT 1

3
• Identify the 230V power supply
cable and the peripherals cables.
Until they are reconnected, the accessories
wires must remain insulated (for example with
a screw terminal or insulating tape) to avoid
any risk of a short circuit.
5
• Clip the aerial on top of the motor.
EN- Replacing the SLIDYMOOVE electronic unit - SOMFY
2