Preparing For Pumping; Card And Cord Protector; Mains Operation - Medela Symphony Mode D'emploi

6. Preparing for pumping

Warning
18
l For chapter 6.2 Mains operation:
Use only the power cord that comes
with the Symphony.
l Make sure the voltage of the power cord
is compatible with the power source.
i
Info
l Use the pump only with the appropriate
program card (Symphony Standard or
Symphony PLUS).
Optional for pump with battery:
l The built-in battery must be charged for
12 hours on receipt of the device.
l The pump can be used during charging.
l If the pump is to remain unused for a
long time, charge the battery every two
months (for 12 hours each time).
l The optimum service life of the battery is
ensured if it is not fully discharged on a
regular basis or if the pump is charged
while not in use.
Pumping time
(fully-charged battery)
Charging time
(for full charge)
approx. 60 min.
12 hours

6.1 Card and cord protector

1
To remove, unscrew the card
and cord protector and slide it
out of the guide rail.

6.2 Mains operation

1
Insert the power cord into the
power socket on the back of
the pump.