JUKI MO-1000 Manuel D'instructions page 2

Masquer les pouces Voir aussi pour MO-1000:
Table des Matières

Publicité

"IMPORTANT SAFETY INSTRUCTIONS"
When using an electrical appliance, basic safety precautions should always be followed, including the following: Read all in-
structions before using this sewing machine.
"DANGER
____ To reduce the risk of electric shock:"
1. The appliance should never be left unattended when plugged in.
2. Always unplug this appliance from the electric outlet immediately after using and before cleaning.
"WARNING
1. Do not use the appliance as a toy. Caution is advised when the appliance is used by children, or near children. This sew-
ing machine can be used by children aged from 8 years and above and persons with reduced physical, sensory or men-
tal capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of
the sewing machine in a safe way and understand the hazards involved. Children shall not play with the sewing machine.
Cleaning and user maintenance shall not be made by children without supervision.
2. Use this appliance only for its intended use as described in this manual. Use only attachments recommended by the
manufacturer as contained in this manual.
3. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or dam-
aged, or dropped into water. Return the appliance to the nearest authorized dealer or service center for examination,
repair, electrical or mechanical adjustment.
4. Never operate the appliance with any air openings blocked. Keep ventilation openings of the sewing machine and foot
control free from the accumulation of lint, dust, and loose cloth.
5. Keep fingers away from all moving parts. Special care is required around the sewing machine needle.
6. Always use the proper stitch plate. The wrong plate can cause the needle to break.
7. Do not use bent needles.
8. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
9. Switch the sewing machine off "O" when making any adjustments in the needle area, such as threading needle, chang-
ing needle, threading looper, or changing presser foot and the like.
10. Always unplug the machine from the electrical outlet when removing covers, when covers are opened to thread the loop-
ers, when lubricating or when making any other user servicing adjustments mentioned in the instruction manual.
11. Never drop or insert any object into any opening.
12. Do not use outdoors.
13. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
14. To disconnect, turn all controls to the off "O" position, then remove plug from outlet.
15. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
16. Basically, the machine should be disconnected from the electricity supply when not in use.
17. If the power cord of this appliance is damaged, it must be replaced with a special cord by your nearest authorized dealer
or service center.
18. (Except USA/Canada) This machine is provided with double insulation.
Use only identical replacement parts. See instructions for servicing Double-Insulated machine.
"SERVICING DOUBLE-INSULATED PRODUCTS
(Except USA / Canada)"
In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided
on a double-insulated product nor should a means for grounding be added to the product. Servicing a double-insulated prod-
uct requires extreme care and knowledge of the system and should only be done by qualified service personnel. Replacement
parts for a double-insulated product must be identical to those parts in the product. A double-insulated product is marked with
the words DOUBLE INSULATION or DOUBLE INSULATED.
The symbol
may also be marked on the product.
"SAVE THESE INSTRUCTIONS"
"This overlock sewing machine is intended for household use only."
1
____ To reduce the risk of burns, fire, electric shock, or injury to persons:"

Publicité

Table des Matières
loading

Table des Matières