Wheel Removal - John Bean T 8058 Manuel D'utilisation

Operations

5.10 Wheel removal

SAFE REMOVAL FOR:
COMPLETE WHEEL OR RIM ONLY
1.
Centre the mobile board under the wheel (or just the rim).
2.
Use the command to lower the wheel until it touches
the board. For the rim only, move it close without
touching the board.
NOTE: IF THE WHEEL IS PARTICULARLY HEAVY
USE A LIFTING DEVICE TO HOLD IT VERTICALLY.
(FORKLIFT TRUCK, HOIST, ETC.).
3.
Hold the wheel in the vertical position and then loosen
the locking ring nut.
4.
Remove the fi xing tool, and then move outwards to
move the mobile board away from the spindle.
5.
Remove the wheel by rolling or lifting from the board
with the workshop lift.
Operator's Manual John Bean T 8058
62