John Bean T 8058 Manuel D'utilisation page 8

Table des Matières

Publicité

USA
EAL0408G04A
EAL0408G05A
EAL0408G06A
EAL0408G07A
8
EC
8-23562A
EAL0395G38A
EAL0395G35A
EAL0395G37A
Safety
wet surfaces.
• Plug unit into correct power supply.
• Do not remove or bypass grounding pin.
Contact with high voltages can cause death or serious injury.
EAL0408G04A (USA) - 8-23562A (EC)
Risk of electrical shock. High voltages are present within
the unit.
• There are no user serviceable items within the unit.
• Service on the unit must be performed by qualifi ed
personnel.
• Do not open any part of the unit other than noted and
allowed areas.
• Turn power switch off and unplug the unit before
servicing.
Contact with high voltages can cause death or serious injury.
EAL0408G05A (USA) - EAL0395G38A (EC)
Risk of pinching or crushing hands and fi ngers during
turntable opening and closing
Keep hands and fi ngers clear of rim edge
during rim Mounting/Demounting on the
turntable.
Keep hands and fi ngers out of the turntable
operating radius while it is operating
Keep hands and other parts of the body away
from moving surfaces.
Make sure you are familiar with all controls before
beginning any operations.
If necessary, activate the bead breaker in stages, for
better control of its action.
Only use approved tools.
Do not bypass safety devices.
Contact with moving parts may cause injury.
EAL0408G06A (USA) - EAL0395G35A (EC)
Risk of pinching or crushing hands and fi ngers during
turntable rotation
Make sure you are familiar with all controls before
beginning any operations.
Keeps hands and other parts of the body away from
the drive belt and moving surfaces during turntable
rotation.
Do not bypass safety devices.
Contact with moving parts may cause injury.
EAL0408G07A (USA) - EAL0395G37A (EC)
Risk of crushing.
Always maintain a safe distance between yourself
and the wheel clamped on the turntable
Make sure you are familiar with all controls before
beginning any operations.
If necessary, activate the bead breaker in stages, for
better control of its action.
Make sure that the rim is correctly clamped on the jaws.
Only use approved tools.
Operator's Manual
John Bean T 8058

Publicité

Table des Matières
loading

Table des Matières