USA
EAL0383G31A
EAL0395G41A
EAL0408G62A
10
EC
EAL0408G78A
EAL0395G39A
EAL0383G02A
Safety
•
Use suitable lubricant to prevent tire friction
•
Do not allow unauthorized persons to approach the
service area
Incorrect wheel mounting on the jaws may result in the
wheel coming loose
EAL0383G31A (USA) – EAL0408G78A (EC)
Risk (fragments of fl ying debris, cutting)
•
When using this machine always wear safety
goggles, gloves and safety footwear
Failure to wear personal protective equipment increases
the risk of injury.
EAL0395G41A (USA) - EAL0395G39A (EC)
Risk of pinching or crushing hands and fi ngers.
•
Only break the bead with the tool arm correctly
positioned.
•
Stay outside the operating radius of the Mounting/
Demounting tool.
•
Keep hands and fi ngers clear of rim edge during
Mounting/Demounting steps.
•
Keeps hands and other parts of the body away from
moving surfaces.
•
Only use approved accessories.
•
Do not bypass safety devices.
Contact with moving parts may cause injury.
EAL0408G62A (USA) – EAL0383G02A (EC)
Risk of pinching or crushing hands and fi ngers.
•
Stay outside the operating radius of the Mounting/
Demounting tool.
•
Keep hands and fi ngers clear of the whole control
panel support arm. Manouvre the arm by using only
the control unit handle.
•
Do not allow unauthorized people in the work area.
•
Keeps hands and other parts of the body away from
moving surfaces.
•
Only use approved accessories.
•
Do not bypass safety devices.
Contact with moving parts may cause injury.
ALWAYS MAINTAIN SAFETY DEVICES IN PER-
FECT WORKING ORDER.
IN CASE OF ACCIDENTAL DAMAGE TO ONE OR
MORE PLATES, REPAIR OR REPLACE IMMEDI-
ATELY.
Operator's Manual
John Bean T 8058