Measuring With The O 2 Probe (Option); Storage And Care - Wohler WA 335 Instructions De Service

Measuring with the O2 Probe (option)
7 Measuring with the O
7.1

Storage and Care

1
4
3
Fig. 44: O probe with green plug connector
2
(1), Membrane-Set (2), two Replacement-
Membrane-Sets (3), probe guard (4) and
Elektrolyte-refill-solution (Scope of delivery)
Visual inspection
Electrolyte
O -Probe
2
sprue for solution
Fig. 45: Membrane-Set with sprue
60
2
2
5
Membrane-Set
Probe (option)
CAUTION!
Leave the O probe connected to the meter if
2
you do not use the meter. This will considerably
reduce the activation time of the probe.
Inspect the probe
•
- when you receive it
- if you have not used it for a year
- in case of abnormal readings
Check if there is enaugh electrolyte in the
•
membrane-set.
Only refill electrolyte and replace the
•
membrane set when it is less than ½ full.