Short Guide - Wohler WA 335 Instructions De Service

Short guide

15 Short guide
80
Press Function
Briefly Power on/off
Press
Start settings mode
and hold
Escape: Terminates the Calibration mode, Settings
Briefly mode and Save mode, and returns to the Measur-
ing mode
Press
Access Calibration mode
and hold
With connected conductivity probe: Toggle be-
Briefly tween (Cond.) in µS/cm or mS/cm, TDS in ppm or
Salt (salinity) in ppt
Press Retrieving saved data
and hold
Toggle between the dissolved oxygen content (DO)
Briefly in % or mg/l when the oxygen probe (not in scope
of supply) is connected
Briefly Settings and calibration mode: Increase value
Briefly Save value
Briefly Settings and calibration mode: Reduce value
Enter key
Confirm
Briefly
Calibration mode: Apply calibration value
Settings mode: Apply setting