Measuring - Wohler CFM 600 Mode D'emploi

6

Measuring

EMERGENCY STOP!
To interrupt a measurement, press briefly the red Start/Stop-Button, see fig. 8. There-
upon the ventilator will spin out.
Fig. 34: Monitor with On/ Off button
Fig. 35: Start menu

Press the On/ Off button on the left side of the
monitor to switch on the device.
After 3 seconds the measurement screen appears
in the display. The measurement mode which you
have selected in the options menu will appear
(see chap. 6).

If you want to change the measuring mode,
tap on the arrow on the top right to open the
start menu.

Select the measuring mode by tapping on
"Adjust", "Validate" or "Heat Performance".
Measuring
EN
41