Display When Ec Probe Is Connected (Blue Connector) - Wohler WA 335 Instructions De Service

Design and function
3.5.2

Display when EC probe is connected (blue connector)

When the EC probe is connected it is possible to toggle between displayed conductivity,
TDS and salinity readings.
Press the EC key to toggle between the three modes.
•
CON
ATC
Temp
Memo
TDS
ATC
Temp
Memo
54
Fig. 38: Conductivity measurement
Conductivity displayed in µS/cm or mS/cm,
depending on reading
Automatic Temperature Compensation
Temperature display
Number of saved data records
Fig. 39: Measuring TDS
Total Dissolved Solids (number of ions in wa-
ter) in ppt (parts per thousand)
Automatic Temperature Compensation
Temperature display
Number of saved data records