Measuring Method; Open; Switching On; Hold The Current Value - Wohler HF 300 Mode D'emploi

5

Measuring Method

5.1

Open

5.2

Switching on

5.3 Measuring Method
5.4

Hold the current value

5.5 Evaluate the
measurement result
5.6 Finishing the
measurement
Pull off the protective cap with two fingers.
•
Press the ON/OFF-key to switch on the meter.
•
Insert the pins of the Wöhler HF 300 into the
•
wood approx. 5 mm.
The meter will display the relative humidity of the
wood on the LCD.
Press the HOLD-key to hold the current value.
•
A H-Icon on the LCD shows that a frozen value is
shown instead of the current value.
• Press the HOLD-key again to bring up the
measuring menu again.
The user can estimate the combustibility of the
measured wood based on the measurement result
according to the three traffic-light colors under the
LCD.
green: standard flammable
yellow: hardly flammable
red: combustion not recommended, because too
humid
Press the ON/OFF-key to switch on the meter.
•
Put the protective cap on the meter.
•
Measuring Method
17
EN