6
Configuration of the Measurement Display
NOTE!
If no key is pressed for 30 seconds in a setting mode, the unit automatically switches to
the measurement view.
6.1
Configuration of the Main display
Fig. 4: Configuration of measurement
display
It is possible to configure the measurement dis-
play so that the value that is important to the user
is in the main display.
(Preset for the main display: CO
Press the ▲-key several times in succession
•
so that the values CO
point temperature and relative humidity are
shown in succession in the main display.
NOTE!
The trend display refers to the main display, cf.
Fig. 2: Measurement display.
The display of the values in the footer remains
unchanged.
Table des matières
).
2
, air temperature, dew
2
EN
41