Yamaha FJR1300AP 2010 Mode D'emploi page 23

1. Coupler (for battery charging)
2. Negative lead (for battery charging)
3. Fuse box
4. Extension wire lead
5. Air filter case
6. Insulator
7. Wire harness assembly
A. Route the wire lead through the clearance
between the battery and fuse box.
B. Install the fuse (SUB) in the inner fuse box
inserting it from underneath.
C. Align the white taped portion with the front
edge of the T-bar.
D. In installing the fuel tank, take care not to
have the extension wire lead pinched be-
tween the fuel tank and frame.
E. Route the extension wire lead along the
side of the air filter case.
F. Connect the connectors of the identical col-
or.
G. Route the wire harness assembly through
the hole in the frame to the left of the head
pipe and over the insulator.
17
MAINTENANCE