Yamaha FJR1300AP 2010 Mode D'emploi page 24

A-A
1. Fuel tank fitting bracket
2. Seat bracket
3. Sub-battery box
4. Relay
5. Coupler (for radio box)
6. Wire lead
7. Wire harness assembly
8. Sub-lead wire
9. Tool band
10. Fuse (PATROL)
11. Rear combination light lead
12. License plate light lead
13. Rear frame
14. Rear fender
A. Route the extension wire lead in the middle
under the tank fitting bracket and seat
bracket.
B. Route the wire lead along and over the rear
combination light lead.
A
C. Route the wire lead under the sub-battery
box.
D. Route the wire harness assembly outside
the sub-battery box.
E. Route the sub-lead wire inside the sub-bat-
tery box.
F. Connect the sub-lead wire to the wire har-
ness assembly. Place the coupler under
the wire harness assembly.
G. Connect the couplers of the identical color.
H. To the rectifier
I. To the relay
J. To the fuse
K. Insert the fuse (PATROL) into the stay.
L. The wiring within the radio box is shown in
the square.
M. Clamp the sub-lead wire and auxiliary in-
struments switch assembly lead.
18
MAINTENANCE