Version - Fronius Symo 10.0-3 208-240 Instructions De Service

AC voltage derating:
Fault ride trough:

Version

Display of version number and serial number of the PC boards installed in the inverter (e.g.,
for service purposes)
Display range
40
Status
ON/OFF voltage-dependent power reduction
GVDPRe
Threshold from which the voltage-dependent power reduction
begins
GVDPRv
Reduction gradient used to reduce the power. Example: 10%
per volt exceeding the GVDPRe threshold.
Message
Allows info messages to be sent via Fronius Solar Net
Status - default setting: OFF
If the function is activated, the inverter does not switch off im-
mediately when a brief AC voltage interruption occurs (outside
of the limits set by the grid provider); instead it continues to feed
in power for a defined time.
DB min - default setting: 90%
"Dead Band Minimum" setting in percent
DB max - default setting: 120%
"Dead Band Maximum" setting in percent
k-Fac. - default setting: 0
Display/Display software/SW checksum/Memory data/Data
memory #1/Power stage set/SW power stage set/EMC filter/
Power stage #3/Power stage #4