The start page of the commissioning wizard appears.
The Technician Wizard is intended for the installer and contains standard-specific settings.
If the Technician Wizard is run, it is important to note down the assigned service password.
This service password is required for setting the UC Editor menu item.
If the Technician Wizard is not run, no power reduction specifications are set.
The Solar Web Wizard must be run.
6
7
The Fronius Solar Web start page appears.
or
The Fronius Datamanager 2.0 website opens.
More Information
Detailed information on Fronius Datamanager 2.0 can be found at:
on Fronius Data-
manager 2.0
22
192.168.250.181 (IP address for WLAN connection)
or
169.254.0.180 (IP address for LAN connection)
If necessary, run the Technician Wizard and follow the instructions
Run the Solar Web Wizard and follow the instructions
http://www.fronius.com/datalogger_web/dmc/help/v2/dmc2/en_oper-
ating_manual.pdf