Warning Notices Affixed To The Device; Information On Dummy Devices - Fronius Symo 10.0-3 208-240 Instructions De Service

Proper use also means
-
-
-
When configuring the photovoltaic system, make sure that all photovoltaic system compo-
nents are operating completely within their permitted operating range.
All measures recommended by the solar module manufacturer for maintaining solar mod-
ule properties must be followed.
Utility company regulations regarding grid power feed must be followed.
Warning Notices There are warning notices and safety symbols on and in the inverter. These warning notic-
Affixed to the De- es and safety symbols must NOT be removed or painted over. The notices and symbols
vice warn against operating the equipment incorrectly, as this may result in serious injury and
damage.
Text of Warning Notices:
WARNING!
An electric shock can be fatal. Before opening the device, it must be de-energized at the
input and output. Allow the capacitors to discharge (5 minutes).
Information on A dummy device should not be connected to a photovoltaic system for real operation and
Dummy Devices may only be used for demonstration purposes.
IMPORTANT! When using a dummy device, you should never connect a live DC cable to
the DC connection sockets.
You may connect live cables or cable pieces for demonstration purposes.
Dummy devices can be recognized by their device rating plate:
carefully reading and obeying all the instructions and safety and danger notices in the
operating instructions
carrying out all the specified inspection and servicing work
installation as per operating instructions.
Safety Symbols:
Danger of serious injury or damage due to
incorrect operation
Do not use the functions described until
you have thoroughly read and understood
the following documents:
- These operating instructions
- All operating instructions for system
components of the photovoltaic sys-
tem, especially the safety rules
Dangerous electrical voltages
You must wait until the capacitors have
discharged.
9