Fitting The Lids; Skimmer Weir And Flange - BWT Soliflow Notice D'installation Et Conseils D'utilisation

11.

FITTING THE LIDS

Place the front lid in position
and lock it.
12. SKIMMER FLANGE AND WEIR
Mount the 2 adhesive seals
(the first before the
waterproofing is laid,
the second on top of
the waterproofing).
FILTRATION BWT myPOOL
CAUTION: THE FLANGE ABSOLUTELY MUST BE MOUNTED,
EVEN IN THE CASE OF TILED CONCRETE POOLS.
THE FLANGE SUPPORTS BOTH THE TRIM AND
THE SKIMMER FLAP.
Mount the flange on top of the
waterproofing.
Place the rear section of the lid
in position.
Put the trim with skimmer flap in
2020/02 - Indice de révision : H - Code : 26901
position.
Clip together.
31/40