BWT Soliflow Notice D'installation Et Conseils D'utilisation page 38

The transformer is not supplied with
230 V
The transformer is faulty
The 12 V current does not arrive at the
bulb
The 12 V current arrives at the bulb but
the bulb does not light up
38/40
2020/02 - Indice de révision : H - Code : 26901
Underwater light
PROBLEM: THE UNDERWATER LIGHT DOES NOT TURN ON
CAREFUL! THESE INTERVENTIONS MUST BE CARRIED OUT BY
A QUALIFIED ELECTRICIAN
CAUSE
Check the voltage at the transformer input terminals
Check the condition of the fuse in the electrical panel
Reconnect the power supply
Replace it with a transformer that has the same rating
Check the electrical line between the transformer and the
underwater light
Replace the faulty bulb
SOLUTION
FILTRATION BWT myPOOL