Plumbing - BWT Soliflow Notice D'installation Et Conseils D'utilisation

6.

PLUMBING

Connect the return fittings to the In the case of a single return Using Ø 50 mm pipes and
outlets on Soliflow. fitting configuration, blank the fittings, connect up the overflow,
outlet that is not in use. a slope of at least 1 % is
mandatory.
CAUTION
IF THE OVERFLOW IS INSTALLED INCORRECTLY (OR NOT AT ALL) THE WATER LEVEL CAN RISE TOO HIGH, EVEN TO THE
POINT OF FLOODING THE MOTOR AND OTHER ELECTRICAL COMPONENTS. THIS TYPE OF INCIDENT IS NOT COVERED BY
ANY GUARANTEE.
Insert the splash lip.
28/40
2020/02 - Indice de révision : H - Code : 26901 FILTRATION BWT myPOOL