Troubleshooting - BWT Soliflow Notice D'installation Et Conseils D'utilisation

18.

TROUBLESHOOTING

The filter bag is clogged (Soliflow's flow
rate has dropped significantly)
The clogging indicator is faulty (the flow
rate is normal)
The pump impeller is obstructed
The filter bag is holed (too clogged)
The filter bag is incorrectly positioned
After this type of problem, check the pump impeller for debris (see the previous section).
36/40
2020/02 - Indice de révision : H - Code : 26901
PROBLEM: AIR BUBBLES RISE FROM THE RETURN FITTING(S)
CAUSE
Filter bag: replace the bag
Cartridge: clean or replace the cartridge
Replace the clogging indicator
PROBLEM: SIGNIFICANT DROP IN SOLIFLOW'S FLOW RATE WITH NO AIR
BUBBLES RISING FROM THE RETURN FITTING(S)
CAUSE
Disconnect the power supply.
Dismantle the pump and clean the impeller.
Reassemble the pump and reconnect the power supply.
Do not forget to reset the timer.
PROBLEM: DIRT IS BEING RETURNED TO THE POOL
THROUGH THE RETURN FITTING(S).
CAUSE
Replace the filter bag or cartridge
Adjust the position of the filter bag or cartridge
Filter
SOLUTION
SOLUTION
SOLUTION
FILTRATION BWT myPOOL