Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1.
RECOMMANDATIONS
1.1
Purpose of the product
•
To allow the water level in the pool to be raised to 50 mm from the top of the pool wall.
•
Skims the surface of the water.
•
Captures large debris (leaves, toys, large insects, etc.)
•
Overflow, to be punched out
•
Leaktight installation with a liner (75/100, 85/100, 150/100)
1.2
Tools and number of people required for installation
•
Same as a standard skimmer. According to the DTP n°8 «pool fitting» (January 1998)
•
Use only the fibrous concrete and welded mesh provided to seal in the copings beside the mirror skimmer
•
You will need 2 pieces of Hung liner locking track to be placed under the ends of the SS reinforcement.
1.3
Limitations of use
Pool coping
•
Min length 500 mm
•
Min depth 30 mm
1.4
Safety advice and recommendations
•
The mirror skimmer must be installed with an automatic water level regulator and an overflow system.
•
The "Hung" liner locking track must be placed on 2 silicon beads.
•
Linerlock must be used to ensure a leaktight seal.
1.5
Upkeep and maintenance
As for pool fittings.
2.
ASSEMBLY INSTRUCTIONS
2.1
Sealing in the skimmer
•
Position the mouth flush with the wall
•
The SS reinforcement is placed on 2 pieces of Hung (just behind the hook section).
12/32
2020/10 - Indice de révision : D - Code : 25110
All manuals and user guides at all-guides.com
CONSTRUCTION & RÉNOVATION
Publicité
Table des Matières
